Young’s Modulus Of Elasticity
One of the essential engineering tests is the bending or fracture of an object or material, and a characteristic showing that it is young’s modulus of elasticity. It is the unchanged-able fundamental property of a material. This measures how easy the material is to stretch or deform.
In this article, we will get into the details of how to calculate young’s modulus of elasticity and what to infer from the result it gives us. We will also learn about the fundamental properties of solid. It is also called elastic modulus or tensile modulus.
Young’s Modulus
Young’s modulus can be defined as the property of a given material which can determine the point of its stretching and breaking. Young’s modulus of elasticity is defined as the ratio of tensile stress to tensile strain.
Tensile stress can be defined as the resistance of an object to an external force that could potentially tear it apart.
The symbol denotes the tensile stress = σ
Tensile strain can be defined as the deformation or elongation of an object per unit length due to the application of tensile stress.
The symbol depicts the tensile strain= ϵ
Hence, Young’s modulus is denoted with the following expression:
E = σ/ϵ
Where,
E denotes Young’s modulus.
σ denotes tensile stress.
and, ϵ denotes tensile strain.
In other words: E = tensile stress/tensile strain
Define Young’s modulus
Young’s modulus of elasticities can be defined as the ratio of the amount of stress applied on an object to its resistance level or elasticity to sustain the stress applied. Young’s modulus is also commonly referred to as the modulus of stress.
The Young’s modulus has been named after the English Physicist- Sir Thomas Young. The modulus describes the property of elasticity of a solid material undergoing tension or compression in a specific direction.
For example, in the case of a metal rod, as heat is applied significantly on a metal rod, it elongates and stretches in due process, but once the heat is removed, it compresses to its original shape.
Factually, Young’s modulus describes how a material deforms under loading. We can take the example of the tensile test to explain Young’s modulus of elasticity further; note that with the actual conduction of the test, the stress-strain of the material is observed on a graph in the form of a curve.
Where strain is depicted on the x-axis and stress is depicted on the y-axis:
The tensile test is a widespread mechanical test that takes a test piece and stretches it along its length.
It is a uniaxial test that applies the force of the solid object from only one direction.
The test machine measures the applied load or force on the solid object and the change in length during the test.
The main output from the tensile test is the stress-strain curve, which describes how much the object or the material we are testing will deform for different levels of applied stress.
While conducting the test, we can observe how the stress-strain curve evolves the material or the object we are conducting the test on; ideally, we can use any metal solid such as steel.
The test ends as the metal fractures or breaks down eventually.
From the tensile test example, we can observe that the stress-strain curve is split into two regions.
The elastic region where we can observe that the curve is linear (in this region, the stress is greater than the strain on the graph)
The plastic region, where the strain is greater than the stress on the graph.
Suppose the applied stress is low, and we remain in the elastic region – then, in that case, the original dimensions of the component will be completely recovered when the applied force or load is removed. For more significant stresses that take us into the plastic region, permanent plastic deformation will remain after removing the applied load.
Young’s modulus formula
Young’s modulus is also known as the modulus of elasticity. Young’s modulus of elasticity measures the stiffness of an elastic body. The higher the value of Young’s modulus, the stiffer the body becomes.
In other words, the higher Young’s modulus, the less elastic the body or the object gets. The unit of Young’s modulus is N/m². This is essentially the same unit as the unit of stress.
Young’s modulus, also referred to as elastic modulus, tensile modulus, or modulus of elasticity in tension, is the ratio of stress-to-strain and is equal to the slope of a stress-strain diagram for the material.
Hence, young’s modulus of elasticity is calculated as the ratio of stress to strain, and it is depicted with the following formula:
E = σ/ϵ
Where,
E denotes Young’s modulus.
σ denotes tensile stress.
and, ϵ denotes tensile strain.
Now, since stress has the unit N/m2 and the strain has no unit whatsoever, Young’s modulus remains the same unit as stress.
Conclusion
Young’s modulus of elasticity, which is named after the English Physicist- Sir Thomas Young, defines the elasticity rate of an object or material as constant stress is applied on the object.
The modulus is depicted as the ratio of strain to stress.
Young’s modulus can be tested with tensile stress, where the load is applied to an object from a single direction to determine its elasticity level. Young’s modulus measures the stiffness of an elastic body; the higher the value of Young’s modulus, the stiffer the body becomes.