-->

Secondary Growth | Secondary Growth Plants

Secondary Growth | Secondary Growth Plants

 Primary Growth: Cells of apical meristems divide, differentiate and develop to form primary tissues. As a result the plant grows in length. This is called primary growth.

Secondary Growth: By the activity of secondary lateral meristems, increase in the circumference/girth of the plant organs due to the formation of secondary tissues in stelar & extra stelar regions, is called as secondary growth.

- Normally secondary growth takes place in roots and stem of dicotyledons & gymnosperms.

- Due to lack of cambium in monocotyledons, secondary growth is absent. But exceptionally secondary, growth takes place in some monocotyledons. Such as - Palm, Yucca, Dracaena, Smilax, Agave, Coconut etc.

Secondary Growth in Dicot Stem

(A) Secondary growth in Stelar Region

Secondary growth in stelar region begins earlier than the extra stelar region.

I. Formation of ring of vascular cambium:

A cambium which is present inside the vascular bundle is called intra fascicular cambium. This is a type of primary meristem.

First of all the cells of medullary rays become meristamatic to form inter fascicular cambium which is secondary lateral meristem.

Intrafascicular and interfascicular cambium are collectively known as vascular cambium. Vascular cambium is formed in the form of a complete ring which is made up of single layer of cells.

In diocot stern some part of V.C is primary and some part is secondary.

Two types of cells are found in the ring of this vascular cambium.

(i) Fusiform initials

(ii) Ray initials

Fusiform initials are long with pointed ends, while ray initials are spherical(oval).

Amount of fusiform initials is more in vascular cambium.

Continuous periclinal divisions or tangential division takes place in fusiform initials.

The plane of division in periclinal divisions is parallel to longitudinal axis of a cell. Through this type of activity few cells are formed towards the radius (periphery) and these cells differentiate into secondary phloem or bast and some of the cells are formed towards the central axis and these cells are differentiated into secondary xylem or wood.

Normally more secondary xylem is formed as compared to secondary phloem due to unequal distribution of hormones. (Secondary xylem is formed 8-10 times more as compared to sec. phloem).

By the pressure of secondary phloem; primary phloem is pushed towards the outside and gets crushed.

By the pressure of secondary xylem, ail the primary tissues- such as primary xylem, pith etc and old secondary xylem degenerates in the centre of the stem. Due to this central part of the stern becomes woody. These activities keeps going on continuously in plants throughout.

Secondary xylem forms in the plant regularly and primary tissues degenerate continuously.

This new secondary xylem also degenerate the old secondary xylem.

Waste materials are formed in the stern such as lignin, suberin, tannin, resin-gums etc. due to degeneration of the cells.

All these waste materials are filled in the lumen (cavity) of tracheids and vessels of secondary xylem. Because of this, wood in the central region of the stem becomes dark coloured (Black brown). It is called heart wood or Duramen.

The peripheral or outer wood which looks light in colour is known as Sap wood or Alburnum. As a result of growing of secondary xylem, the diameter of heart wood increases ­Physiologically active wood is sapwood.

The main function of sapwood is water conduction. Heart wood provides maximum mechanical strength to stem.

Classification of Wood

(A) On the basis of amount of parenchyma wood is classified into two groups:

1.  Manoxylic wood: Such type of wood contains more living parenchyma. It is soft and loose wood eg. Cycas and other gymnosperm.

2. Pycnoxylic wood: Such wood contains less amount of living parenchyma. It is hard wood. Such type of wood are found in most of the plants.

Example: Pinus (Chir), Mango, Acacia (Babool), Tectona (Sagwan), Dalbergia (Shisham).

(B) On the basis of distribution of parenchyma wood is classified into three groups:

1 Apotracheal: In this type of wood parenchyma is in scattered form.

Example: Gymnosperm

2. Paratracheal wood: In this wood parenchyma is arranged or distributed in the form of masses or groups.

Example: Dicotyledon plants.

3. Syntracheal wood: In this wood parenchyma is collected around the vessels.

Example: Terminalia arjuna.       

(C) Classification based on vessels:

On the 'basis of presence or absence of vessels, wood is classified in two categories

1. Non-porous soft wood: Vessels are absent in such type of wood.  

Example: Gymnosperm

2.  Porous wood: Vessels are present in such type of wood. On the basis of arrangement of vessels porous wood is divided into two groups.

(I) Ring porous wood: Vessels, are arranged in the form of a ringing this type of wood. Such wood conducts water more efficiently.

Example: In temperate region. Ex. Dalbergia

(II) Diffused porous wood: Asystematical distribution of vessels is found ill this type of wood.

Example: In tropical region. Ex. Azadirachta.

(III) Formation of Annual rings:

Annual rings are formed due to unequal activity of vascular cambium

The activity of cambium does not remain same; it is changeable in the whole year. Activity of vascular cambium is affected by physiological and environmental factors.

In winter or autumn season the activity of the cambium is less and the secondary xylem or wood formed is not extensive through the vascular cambium. Cells formed during this period are small thick walled and have narrow lumens. This is called autumn wood or late wood.

The vascular cambium is highly active in spring or summer season and secondary xylem formed during this period is extensive and cells of secondary xylem are larger, thin walled and have wider lumen. This wood is known as spring wood or early wood.

The spring wood is lighter in colour and exhibits low density where as the autumn (or winter) wood is darker and has 'higher density. 

Secondary Growth in Dicot Root :  Secondary Growth Plants

First of all, conjunctive tissue becomes meristematic during the secondary growth in a dicotyledon root and form separate curved strips of vasular cambium below phloem bundles. Then after, the cells of pericycle lying opposite to protoxylem also becomes meristematic to form additional strips of cambium. In this way a complete ring of vascular cambium is formed.

The portion of vascular cambium formed by pericycle is less.

The main: portion of vascular cambium is formed by conjunctive tissue.

The shape of ring of vascular cambium is wavy in the beginning, but later on it becomes circular due to the pressure of secondary xylem.

The portion of vascular cambium formed by conjunctive tissue becomes meristematic first and form the secondary xyelm towards the centre. Ultimately the ring becomes circular by the pressure of secondary xylem (Pushing outwards). 

The activity of vascular cambium of root is the same as the activity of vascular cambium of stem.

Secondary xylem is formed towards the inner side and secondary phloem is formed towards the outer side-by vascular cambium.

The portion of vascular cambium which is formed by pericycle is responsible for the formation of pith rays.

These are made up of parenchyma. These pith rays are known as primary medullary rays (Multiseriate).

A few medullary or pith rays are also formed from remaining vascular cambium. These are called secondary medullary rays (uniseriate). Thus two types of medullary rays are found in the secondary structure of roots. 

Functions of secondary meristem

1.  Healing of wounds: When any plant part gets injured wound is formed there. Boundary of the wound is raised outside and composed of similar type of living cells (parenchyma) called callus. Living cells of wound are responsible to form a cambium. This is called wound cambium. It is also called inducible cambium. This newly formed cambium forms cork towards the outside. This cork covers the wound entirely. Wound cambium is a secondary lateral meristem.

2. Abscission: 

Falling of any plant organ is called as abscission

Abscission takes place due to formation of abscission layer at the base of plant organ and it is composed of parenchyma.

ABA induces the formation of abscission layer.

Middle lamella is dissolved in abscission layer during abscission and primary walls also dissolve partially or completely. Sign of leaf fall on stern is called leaf scar. It is a type of wound. The living cells of leaf scar are responsible to form cork cambium, which produce cork. Cork covers the wound. At the site of abscission protective layer is found which is suberized.

3. Knots: Knot is formed when branches are embedded inside the main stern.

4. Grafting: Grafting is not possible in monocots because cambium is absent there.

Anomalous Secondary Growth in Dicot Stem

1. Anomalous/abnormal position of vascular cambium:

Normally vascular cambium is circular, but it is folded in stern of some plants. Later on these folds break and separate from each other. Each fold is responsible to form a complete vascular bundle. Many vascular bundles are formed in stern.

Example: Thinouia, Serjania, Bauhinia.

2. Abnormal Activity of vascular cambium:

Generally xylem and phloem is formed from the maximum part of the vascular cambium and medullary rays are formed from the few parts of vascular cambium. But in some plants parenchyma (Medullary rays) is formed from the maximum part of the vascular cambium and rarely in some places xylem and phloem are formed.

Example: Aristolochia, Vitis vinijera (Grape).

3. Sequential-or successive ring of vascular cambium:

In some of the plants, a new ring of vascular cambium is formed each year. This is formed outside the previous ring.

Example: Mirabilis, Boerhaavia, Bougainvillea etc.

4. Formation of vascular cambium from pericycle:

Vascular cambium is formed from the pericycle in plants of Amaranthaceae and Chinopodiaceae family. A complete ring of vascular cambium is formed from the pericycle.

5. Interxylary Cork: A cork layer that develops between the two growth rings of secondary xylem is called interxylary cork.

Example: Artemesia tridentata.

 6. Formation of cork cambium from Epidermis:

Cork cambium originates from the epidermis in some of the plants.

Example: Malus pumila, Solanum dulcamara, Ouercus suber (oak).

The commercial cork is obtained from the plant Quercus suber, which is commonly found in Portugal and parts of Spain      

7. Formation of cork cambium from pericycle:

Cork is derived from the pericycle in some plants.

Example - Thuja, Clematis

8.  Formation of cork cambium from phloem: Vitis and Berberis

Anomalous- Secondary Growth in Monocot Stem

In some members of plants such as Dracaena, yucca, Agave, Aloe arboresence, Lomandra, Kingia, Sanseviera, etc, vascular cambium is formed from the outer region of the ground tissues.

Parenchyma formed towards the outside by the vascular cambium and secondary vascular bundles are formed toward the inner side.

In some plants, the girth of the stern increases without cambium, such as-Palm, Musa. Tulipa etc.

The apical meristem of these plants is of special type. This is known as primary thickening meristem. This apical meristem is responsible for the growth in both length and girth (thickness) of the plant.

Gymnosperm stem: In Cycas and Gnetum successive ring of vascular cambium is found.